EMC shield clamps for C section rail C30
with or without integrated strain relief
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
When using types with integrated strain relief cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved. We also offer EMC shield clamps with double strain relief function acc. to PROFINET installation guidelines.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The shield clamps can be mounted on C section rails C30 using the SC screw foot.
With the LFC cable shield clamp the cable shield is directly contacted at the C section rail. Your existing cable clamp can still be used for strain relief. The LFC clamp is simply snapped onto the C-rail and is then fixed using the screw of your cable clamp.
Now available: sets consisting of EMC shield clamp LFC and matching CCL bracket clip.
Part No.
36231
Specifications
Properties
Vibrationssicher
Advantages and benefits
Partially with integrated strain relief
Large contact area
Shield contact and strain relief separated
Easy assembly and removal
The spring design requires no adjustments and will permanently maintain contact to the cable shield
Shock and vibration resistant, maintenance free
Integrated double strain relief function acc. to PROFINET installation guidelines
For mounting on all standard C section rails C30 (16-17 mm)
LFC: space-saving due to the combination of the LFC shield clamp with a cable clamp
EMC shield clamps are used, where the shield of cables must be connected to the earth potential. They are easy to use and effective in earthing single cable shields.
When using types with integrated strain relief cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved. We also offer EMC shield clamps with double strain relief function acc. to PROFINET installation guidelines.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm cable shield: width 26.25 mm).
The shield clamps can be mounted on C section rails C30 using the SC screw foot.
With the LFC cable shield clamp the cable shield is directly contacted at the C section rail. Your existing cable clamp can still be used for strain relief. The LFC clamp is simply snapped onto the C-rail and is then fixed using the screw of your cable clamp.
Now available: sets consisting of EMC shield clamp LFC and matching CCL bracket clip.