UT | Split U-shaped cable grommet
for cables with connectors, tool-free assembly / up to IP54
The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorised cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures.
The wall thickness of the enclosure can be from 1 to 4 mm.
The UT is a split grommet that can be mounted around the cable. The UT grommet is ideal for installation on the lower part of the enclosure.
After fitting the grommet with the cable, it is inserted into the recommended cut-out. The enclosure cover is then placed on the lower part.
By screwing the cover tightly on the enclosure, pressure acts on the cable grommet and, depending on the properties of the enclosure, enables a sealing rate of up to IP54.
Part No.
56103
Specifications
Flame class
UL94-V0
Properties
Halogenfrei, UV-beständig, Silikonfrei
Max. operating temperature
100 C°
Min. operating temperature
-40 C°
Advantages and benefits
Allows the routing and sealing of cables that can vary in diameter up to 2 mm
Simple, tool-free assembly
Can be used for cable diameters from 4 to 11mm
Protection class up to IP54 (if the grommet is selected correctly and depending on the enclosure properties)
Cost-effective solution
Product types and sizes
UT 6-8 gy
Part No.
56003
EAN
4251269335426
Package quantity
Unknown
For min. wall thickness
1 mm
UTB bk
Part No.
56100
EAN
4251269335464
Package quantity
Unknown
For min. wall thickness
1 mm
UTB gy
Part No.
56000
EAN
4251269335396
Package quantity
Unknown
For min. wall thickness
1 mm
UT 5-7 gy
Part No.
56002
EAN
4251269335419
Package quantity
Unknown
For min. wall thickness
1 mm
UT 9-11 gy
Part No.
56006
EAN
4251269335457
Package quantity
Unknown
For min. wall thickness
1 mm
UT 5-7 bk
Part No.
56102
EAN
4251269335488
Package quantity
Unknown
For min. wall thickness
1 mm
UT 9-11 bk
Part No.
56106
EAN
4251269335525
Package quantity
Unknown
For min. wall thickness
1 mm
UT 6-8 bk
Part No.
56103
EAN
4251269335495
Package quantity
Unknown
For min. wall thickness
1 mm
UT 7-9 bk
Part No.
56104
EAN
4251269335501
Package quantity
Unknown
For min. wall thickness
1 mm
UT 7-9 gy
Part No.
56004
EAN
4251269335433
Package quantity
Unknown
For min. wall thickness
1 mm
UT 8-10 bk
Part No.
56105
EAN
4251269335518
Package quantity
Unknown
For min. wall thickness
1 mm
UT 8-10 gy
Part No.
56005
EAN
4251269335440
Package quantity
Unknown
For min. wall thickness
1 mm
UT 4-6 gy
Part No.
56001
EAN
4251269335402
Package quantity
Unknown
For min. wall thickness
1 mm
UT 4-6 bk
Part No.
56101
EAN
4251269335471
Package quantity
Unknown
For min. wall thickness
1 mm
The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorised cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures.
The wall thickness of the enclosure can be from 1 to 4 mm.
The UT is a split grommet that can be mounted around the cable. The UT grommet is ideal for installation on the lower part of the enclosure.
After fitting the grommet with the cable, it is inserted into the recommended cut-out. The enclosure cover is then placed on the lower part.
By screwing the cover tightly on the enclosure, pressure acts on the cable grommet and, depending on the properties of the enclosure, enables a sealing rate of up to IP54.