DIN-RC rail cutter
for top hat DIN rails & bus bars, with length stop 1000 mm
The DIN-RC cutter cuts various DIN rails with little effort and accurately. The cut is clean and free of burrs; there is no waste.
The length stop with guiding device ensures that nothing slips while cutting and that the cut is always 90° at an exact angle. Thanks to the optimal power transmission of the cutting device, only little effort is required.
The DIN-RC 1 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
The DIN-RC 2 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
- DIN top hat rails 15 x 5.5 mm
- Bus bars 10 x 3 mm
Not suitable for stainless steel rails!
Part No.
80190
The DIN-RC cutter cuts various DIN rails with little effort and accurately. The cut is clean and free of burrs; there is no waste.
The length stop with guiding device ensures that nothing slips while cutting and that the cut is always 90° at an exact angle. Thanks to the optimal power transmission of the cutting device, only little effort is required.
The DIN-RC 1 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
The DIN-RC 2 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
- DIN top hat rails 15 x 5.5 mm
- Bus bars 10 x 3 mm
Not suitable for stainless steel rails!
